The radiator recycling machine is specially designed for radiators. Before operation, the heat sink should be cut into regular shapes. Then place the cut radiator smoothly into the inlet. Within seconds, the copper tube and aluminum fins will be discharged separately. Copper tubes will remain intact, aluminum fins will damage one row of radiators, and two rows of radiators will remain intact. The machine can peel off single-layer and two-layer radiators. The center distance between the blades comes in three sizes: 19mm, 21mm, and 25mm. This means it can separate three heat sinks. The machine weighs 650kg and the daily output is as high as 3000KG. It has the characteristics of simple operation and reduced floor space. This machine proved to be the best choice for recycling used radiators.
1. High efficiency. Separate copper pipes from aluminum foil at high speed,no damage to copper pipes. 2. Wide application. Suitable to old electrical appliance recycling center,air conditioner recycling place,etc. 3. Automatic recycling instead of labor working, low electricity consumption and noise, cost-effective, low breakage rate.